Die cutting is really a highly versatile fabrication method. This type of zinc casting will be able to perform multiple operations, including those linked to curling, coining, or bending sheets of metal. The specific die may vary significantly in proportions together with the smallest the dimensions of your hands and practical for making microelectronics, even though the largest are built to the have the entire body side of automobiles and sized 20 feet square and 10 feet thick. Addititionally there is the possibility to utilize rotary or flat-bed die techniques to match the particular application. Using the right method, it really is possible to create a variety of intricate products.

Here are a few of the more popular die cutting operations:


The bending method relies upon reshaping some metal making use of the force of pressure in the die. This really is a quite effective solution to create curves or 90 degree angle inside the product design.


Broaching may be the preferred approach to cut a material that is too much or too thick to shape using almost every other means. This die employs large cutting teeth in multiple rows that quickly and efficiently trims away on the metal before the desired shape is achieved.


Coining is a technique used to cut the precise or intricate holes within the product material. It relies on a stamping action that quickly punches circular holes. This technique is perfect for these products that have the unique design or shape.


Curling can be a useful approach to bend or roll material to generate a precise curved shape. This zinc die casting is wonderful for taking out the sharp edge on sheet metal parts or creating door hinges. The z1nc process will also help to produce material stiffness.

Cut Off

The aluminum die casting is really a practical option to finish work and quickly takes care of trimming any leftover metal. Also, it is beneficial to shorten or cut a bit of metal by a precise amount to have it right for future machining or tooling.


Drawing can be a procedure of stretching a material from a specific length, which leads to the metal becoming thinner the greater number of it can be stretched. The most frequent products made using this method include wires, bars and tubing.


Shearing is supposed to cut or slice a bit of metal along a precise line. It is a practical technique for producing square or rectangular blanks.