Do you need to put in a photo in your quilt that looked similar to area of the fabric than an iron-on decal?
Previously, we trusted photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a great new way of getting your favorite photo away from your scrapbook and on to your quilt block.
Direct-to-garment (DTG) printing is a form of digital printing. Using a price of about $20,000, it’s not practical to run out and get your own DTG printer. The typical price for latte printer is $8 to $10.
This process is a bit more expensive compared to the traditional photo transfer method. That’s partially since the technology is so new. Should you decide to try a DTG photo on your memory quilt block, there are several things to look for when deciding on the printer who will carry out the meet your needs:
1. Ensure there are no chemicals necessary to pre-treat your fabric first. Some DTG printers create a graphic that may be much more like screen printing. You don’t want that seem to be or feel on your own quilt. The ink will probably be hard on top of the material and may eventually (sometimes much earlier than later) will quickly crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. Provided you can feel the ink is raised above the surface by any means in any way, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.
2. Use a kind of digital DTG printing available from the Brother GT 541. You will find no chemicals found it necessary to pre-treat the fabric. The inks bond using the natural fibers and they are heat cured to set the graphic. The inks are water based, which helps leave a soft yet crisp image on the fabric.
There are some downfalls to using led uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is really a form an electronic digital printing, there is absolutely no white ink. White is the lack of color. Which means that you cannot print a picture on navy blue or black fabric.
Digital garment or fabric printing is a CMYK format – cyan, magenta, yellow, and black. You are able to mix those colors to have a full spectrum of accurate colors – just not white. You will find DTG printers that print white ink, but most of those require chemical pre-therapy for the material and can leave you with that thick surface print.
You must utilize a light colored or neutral fabric and it needs to be cotton or a cotton blend. The material must have the capacity to withstand 350 degrees for around half a minute. When you are not 09dexypky with 100 percent cotton or a 50/50 blend, ask your printer when the fabric works.
Measurements of your print can be a limitation. Most DTG printers have got a printing field as much as 14 inches x 16 inches. For almost all quilters, that size range won’t be considered a problem.
And speaking of printing fields, here’s a hint. Most direct to t-shirt printer charge for the 14×16 surface. If your blocks will allow 2 or 3 photos to fit within that range, you can get them all printed for the price of one. Check with the printer to determine if it’s possible together with your particular project.
Like the majority of technological advances, the price tag on digital garment (or fabric) printing will probably decrease with time. Maybe it will even be available on smaller printers for home and personal use. Until then, try to look for a DTG printer for your next photo quilt project. The results may be like custom fabric, which will be an incredible touch to your unique quilt!